Electronics Club website is a place for any student or people, those are interested to know about the basic ideas of Electronics and Communication Engineering.
Resistor-Transistor Logic (RTL) The resistor-transistor logic (RTL) are digital circuits that are constructed using resistors and bipolar junction transistors (BJTs). The resistors are the input network while the transistors function…
Diode Logic The diode logic uses diodes and resistors to implement Boolean functions. Diodes function as a switch that conducts only during the forward biasing condition. The simplicity in the…
Directional Couplers Directional couplers are flanged, built-in waveguide assemblies which can sample a small amount of microwave power for measurement purposes. They can be designed to measure incident and/or reflected…
Differences between MTI and Pulse Doppler Radar The differences between the MTI and Pulse Doppler Radar (PDR) techniques are discussed in this section for a better understanding of the MTI…
Antenna Array An antenna array is a system of similar antennas oriented similarly to get greater directivity in the desired direction. It may be defined as, “A radiating system consisting…
Rectifier Basic Rectifier basic & its types are explained in this post – The rectifier is a device which converts the input AC signal into DC. The rectifier converts the…
Magnetron Oscillator Magnetron Oscillator is another type of microwave generator. In the magnetron oscillator, the magnetic field is perpendicular to the electric field and is therefore called cross-field or M-type.…
Dispersion in Optical Fibers Dispersion in Optical Fibers : Dispersion, also known as pulse spreading, means spreading out of an optical pulse of light energy in time as it propagates…
Difference between Signal & Function Generator In this post, we are discussing about the basic Difference between Signal & Function Generator. But before that, we should know something about these…
Spectrum Analyzer A spectrum analyzer or spectral analyzer is a device, which is used to calculate the magnitude of an input signal within the full frequency range. The main purpose…